1993 Honda Accord Igniter

Part Number: W0133-1624719

Notes: Eng: -3011902, California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Detailed Notes: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Eng: -3011902, California model. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Detailed Notes: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Eng: -3321571, Non-California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Detailed Notes: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Eng: -3321571, Non-California model. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Detailed Notes: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Eng: -4012475, California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Detailed Notes: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Eng: -4311975, Non-California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Detailed Notes: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Models made in USA. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Detailed Notes: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Detailed Notes: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1612107

Notes: Eng: -3011902, California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1612107

Notes: Eng: -3011902, California model. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1612107

Notes: Eng: -3321571, Non-California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1612107

Notes: Eng: -3321571, Non-California model. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1612107

Notes: Eng: -4012475, California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1612107

Notes: Eng: -4311975, Non-California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1612107

Notes: Models made in USA. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1612107

Notes: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: 5976-05015923

Notes: Ignitor -- 2 Mounting Holes

Part Number: W0133-1624719

Notes: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Models made in USA. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Eng: -4012475, California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Eng: -4311975, Non-California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Eng: -3011902, California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Eng: -3321571, Non-California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Eng: -3011902, California model. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).

Part Number: W0133-1624719

Notes: Eng: -3321571, Non-California model. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink #30121-PT2-006 (Accord & Prelude models) or #30121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included).